BITMAIN L3+ 504MH/S (Used Miner)

(1 customer review)

$1,199.00$1,499.00

  • Model: Bitmain L3+
  • Maximum hashrate: 504 Mh/s
  • Power consumption: 800W
Clear

Description

The Antminer L3+ is custom-built mining equipment for Litecoin that employs the same hardware components as other Scrypt-based currencies. The Antminer L3+ is an updated model of the L3, and it outperforms the L3 in terms of functionality and competitiveness.

Specification:

The Antminer L3+ is equipped with the BM1485, one of the first Litecoin ASIC chips, which increases hashing power. The miner has 288 ASIC chips, making it more convenient than other Litecoin miners on the market.

Thanks to its small design and effective cooling system, the miner may be used everywhere, including mining farms and residential areas.

The AM335x 1GHz ARM Cortex-A8 microprocessor in the Antminer L3+ is a control board that assures your mining blocks are sent quickly. The gadget features a high-grade aluminum casing that protects it from dust and heat, as well as two cooling fans on the front and back.

To increase cooling capacity, Antminer L3+ utilizes a combo of convection and conduction. This type of cooling improves the stability of mining operations. Every chip on the L3+ has high-quality aluminum heat sinks integrated, which increases the heat-absorbing capability.

The two fans at the tubes’ ends are positioned to disperse heated air by rapidly bringing in cooler air. AS SEEN BY THE HEAT ABSORPTION MECHANISM, the L3+ was built for maximum power while keeping the surroundings cool.

The Antminer L3+ utilizes a simple user interface (UI). The UI is simple and displays everything from miner status to chip information, speed, and temperature. There is also the potential for future firmware upgrades.

Hash Rate:

The hash rate is one of the requirements for purchasing a miner. The highest hash rate of the Antminer L3+ is 504Mh/s.

Consumption of Power:

The amount of electricity utilized is mostly determined by the power supply unit you’re using, the operating temperature, and the accuracy of the meter monitoring power input.

Power consumption is a critical component in determining miners’ profitability. It would be best to compute the cost based on the country’s or region’s energy prices. The Antminer L3+ uses about 800W of electricity.

Noise Level:

If you’re mining in a residential neighborhood, the perfect place to keep the Antminer L3+ should be a large and well-ventilated room. While mining, the L3+ produces about 76 dB of noise. This noise level is comparable to that of a vacuum cleaner and a food mixer.

Dimensions:

The size of the gadget is critical since larger and bulkier devices take up so much space and are difficult to transport. When expanding the number of rigs in a mining farm, the size of a miner is critical. It’s easier to stack and connect smaller devices. The Antminer L3+ is small and easy to handle, with 465mm x 215mm x 305mm and a weight of 6.5kg.

I Hope, you have acquired adequate information about this device.

Additional information

Bitmain Antminer

L3+ With APW3++, L3+ With APW7, L3+ With New APW7, L3+ With New PC, L3+ With PC

1 review for BITMAIN L3+ 504MH/S (Used Miner)

  1. Asicminercentral

    Best Product

Add a review

Your email address will not be published. Required fields are marked *

Send Inquiry
close slider

    ×